White L925BP FTTH Optical Fiber Splice Fast Cold Junction Connector
Product Description
– The optical fiber splice provides a precise, simple and low cost method of splicing optical fiber. The splice design utilizes an articulated metalic splicing element held inside a molded plastic body and cap to provide a fast, permanent, low-loss splice
– The Fibrlok has an insertion loss of <0.2dB with a minimum tensile load of 4.4N (1.0lb-f) and splice reflection no greater than -40dB
– During assembly, the splice is held within the Assembly Tool. After the fibers are inserted into the splice, the cap is depressed with the Assembly Tool. The motion of the cap squeezes the “legs” of the element such that the “legs” come together. The fibers are permanently aligned and gripped in the fiber holding region of the splice when the cap is actuated
Project Specifications
Scope φ0.25 mm & φ0.90 mm Fiber
Fiber diameter 125μm (G657A & G657B)
Tight cladding diameter of 250μm & 900μm
Applicable Mode Singlemode & Multimode
Operating time of approximately 10 seconds (excluding fiber processing)
Insertion loss ≤ 0. 1dB (1310nm & 1550nm)
≤ -40dB return loss
Bare fiber fastening force> 5 N
Tight cladding clamping force> 8 N
Operating temperature -40 ~ + 75
Re-use (10) IL ≤ 0.2dB RL ≤ 5dB
2.Pictures
No more offers for this product!
General Inquiries
There are no inquiries yet.
Reviews
There are no reviews yet.